CableMod Basics B-Series 12V-2×6 12VHPWR PCI-e Cable for be quiet!

Power the next generation of graphics cards with the CableMod Basics 12V-2×6 90° PCIe Cable. Featuring a 90° 12V-2×6 connector paired with two 12-pin PCIe connectors, this high-quality cable is a replacement cable for be quiet! power supplies, and enables these PSUs to power graphics cards with a 12V-2×6 or 12VHPWR power port.90° 12V-2×6 Connector with StealthSense TechnologyOur patent-pending StealthSense Technology utilizes a new hidden bridge inside the 90° 12V-2×6 connector, removing the need for sense wires altogether. No more unsightly “wire loops” used by competitors – you get a cleaner, more aesthetically pleasing cable, making our StealthSense cables the cleanest and most reliable 12V-2×6 cables available today.16AWG for 600W Power DeliveryThe CableMod Basics 12V-2×6 90° PCIe Cable is constructed with quality 16AWG wire to fully support up to 600W of power delivery, enabling you to power your graphics card without worrying about blue screens or system crashes. Softer Wire Jackets and
Fully Crimped TerminalsEach wire utilizes fully crimped terminals for the most reliable construction, and softer PVC wire jackets means less stress on each terminal when wires are bent. This cable also uses precision molded connectors to ensure compatibility and a secure fit with today’s 12V-2×6 GPUs.

Important Notes:
Please note that this product has strict compatibility requirements
Using this product with unsupported hardware may result in system damage
Do NOT use with any makes or models not listed in our compatibility list below
This cable requires two unoccupied 12-pin PCIe ports on your PSU
Do NOT attempt to use this cable with fewer than two 12-pin PCIe connections to your PSU
Please ensure that this product is fully plugged into the GPU connector before operating
Please contact our support staff if unsure

Features:
Made for be quiet! PSUs
90° 16-pin 12V-2×6 to 2 x 12-pin PCIe
CableMod StealthSense Technology
Quality 16AWG Wire
Full Support for 600W90° – Variant AThe 90° Variant A is designed for GPU ports with the latch facing upwards.
This would result in the cable running towards the cooler side of the GPU.

If this is installed in a GPU port with the latch facing downwards, the cable will instead run towards the GPU backplate.